Fec Pos Drivers

Description and specifications of company's fastening automation systems. Map to building is included. In addition to ordinary Windows printer driver functions, this driver has controls specific to POS. This is for English model, Traditional Chinese model and South.

In-warranty repair An Epson Authorized Servicer is available to assist you with repairs. Simply bring your Epson product, along with proof of the date of original purchase, to the nearest Authorized Servicer in your area. Epson's nationwide network of Authorized Servicers are conveniently located to assist you with your repair needs. Your system device product is covered against defects in materials and workmanship during the warranty period and, while under warranty, all replacement parts and labor are provided without charge. Authorized Service Provider Program Epson Customer Care Centers (ECCCs), our nationwide network of Authorized Service Providers, are available to offer timely and cost-effective support solutions for Epson POS products. This includes in-warranty and out-of-warranty product support, as well as equipment diagnostics and spare parts. Simply contact the nearest ECCC in your area.

Madhubala Tamil Serial Full Episode 40. Strategic Developer Partners have the option to become ECCCs. The ECCC program offers two advantages: maximizing the profit potential of your service department and building long-term relationships with your customers. If you're interested in becoming authorized as a service provider, you must meet certain Epson requirements.

• AP-3435 15” Bezel Fanless POS system. • Copyright Notice This document is copyrighted, 2012. All rights are reserved. Firich Enterprise Co., Ltd reserves © the right to make improvements of the product described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission from Firich Enterprise Co., Ltd. • Safety and Warranty 1. Read these safety instructions carefully.

Keep this user's manual for later reference. Disconnect this equipment from any AC outlet before cleaning.

Do not use liquid or spray detergents for cleaning. Use a damp cloth. • Introduction AerPOS ( AP-3435 ) Introduction...1 A Quick Tour for AP-3435...2 AP-3435 Dimension...

3 Rear I/O Panel Connectivity...4 Aer POS AP-3435 Packing List... 4 Hardware Installation and Upgrading 2.5” Hard Disk Drive Installation...

5 MSR / Finger Print Reciever / RFID / iButton Installation.. 6 USB HID MCR Configuration Modification.. • Wireless LAN Driver Installation for all Windows Operating Systems (Optional).34 Specifications AP-3435 Specifications... 35 Troubleshooting Touch Panel Does Not Work...36 OSD Panel Cannot Work Precisely..36 Cannot Detect SATA Storage HDD/SSD..36 PS/2 Keyboard Is Not Functioning Normally.. 37 LAN Is Not Functioning Properly.. • AerPOS Series AP-3435 AerPOS ( AP-3435 ) Introduction Bezel Free AerPOS series reaches design concept of the Total Cost Ownership and balance the strong requirement for POS quality, AerPOS is implemented with Quality-Oriented, Space- Effective, Fanless Energy Saving. AP-3435 also provides a decent choice for noise-free environment applications with optimized product reliability.

• AerPOS Series AP-3435 A Quick Tour for AP-3435 15” Touch Display Power Switch HDD LED USB Port Display OSD Power Switch / Status Blue LED: Power ON 2.5” SATA Drive Red LED: Power Off / Standby Access HDD / SATA Status. • AerPOS Series AP-3435 AP-3435 Dimension H: 360mm W: 370mm W: 240mm D: 235mm. • RJ-45 (optional) Serial Port COM 3 COM 5 RJ-45 (optional) Serial Port COM 5 Aer POS AP-3435 Packing List Standard Optional & Peripherals 15” AP-3435 AerPOS Touch Terminal COM 3 / COM 5 optional Com Port 12V 90W Power Adaptor. • AerPOS Series AP-3435 Do not remove the Display Module without switch off the terminal. Power must be switched off and power cord must be unplugged.

Every time you service the system, please be aware of this. 2.5” Hard Disk Drive Installation 1. • AerPOS Series AP-3435 MSR / Finger Print Reciever / RFID / iButton Installation 1.

Remove the plastic cover at the back of Touch Display Module 2. Insert the MSR / RFID / Finger Print Receiver / I- button Module into USB A- Type Connector.

• AerPOS Series AP-3435 COM Port Power Setting 1. Remove back cover of the terminal by two screws on the top side 2. Select COM port Power by jumper JCOM6 JCOM3 JCOM5 JCOM1 JCOM4 3. Please Make sure the correct power voltage is selected for serial devices. • AerPOS Series AP-3435 Integrated VFD / LCM Installation 1. Remove the VFD Plastic cover and Back Cover on the terminal 2.

VFD is connected to the COM6 3. Make sure 12V is selected for COM6 4. Connect the COM 6. • AerPOS Series AP-3435 Memory (DDRIII RAM) Installation Unfasten and remove the back cover Install DDRIII memory Before restore the top cover, please check the thermal pad stays in the same position. • AerPOS Series AP-3435 15” / 11.6” 2 Display Installation Remove the VFD plastic cover Assemble the 2 screen with bracket with 4 screws Assemble the 2 Screen with bracket to Terminal. Fasten 3 screws (1 on top, 2 underneath) Plug in VGA and DC 12V.

• AerPOS Series AP-3435 15” 1 Touch Display Installation & Swapping Release 1 thumb screw at the back side of Display Lift the Display Module up to disassemble from the main unit of terminal Display and main body units are separated. • AerPOS Series AP-3435 OSD Function and Adjustment OSD function and adjustment Back Light Power (finger touch for 2 seconds) Back Light Power On – Blue LED indication Back Light Power Off – LED indication Button Down (finger touch for 2 seconds) • AerPOS Series AP-3435 Cash Drawer Installation Before connecting the cash drawer to the AP-3435, please make sure the drive voltage and cable pin assignment of the cash drawer matches the definition of the cash drawer port of AP-3435. Please refer to the jumper setting and pin definition (for more information on the Cash Drawer. • AerPOS Series AP-3435 AP-3435 comes with a variety of drivers for different operating systems. You can download all the necessary drivers and utilities from Please follow this installation sequence. Driver installation sequence: SMbus Driver->Chipset Driver ->VGA Driver ->LAN Driver ->Audio Driver ->Touch Tools.

• AerPOS Series AP-3435 SMbus Driver Installation SMbus Driver Installation for Windows XP 1. Download drivers from FEC website or insert the Driver CD into your CD ROM Drive. Double click Setup.exe, and Click Next to start driver installation 3. Click Yes for license agreement. • AerPOS Series AP-3435 4. Choose Next for the following steps 5. Finish and Restart system.

• AerPOS Series AP-3435 Chipset Driver Installation Intel ATOM D525 Chipset Installation Utilities for Windows XP 1. Download drivers from website or insert the CD into your CD ROM Drive.

Open Setup.exe and Click Next. Read the License Agreement and click Yes. • AerPOS Series AP-3435 4. Click Next and the drivers for the Intel Chip set will install. Please wait while the setup program processing. When the 'Setup COMPLETE' message appears click Finish to restart your computer. • AerPOS Series AP-3435 VGA Driver Installation GMA3150 driver installation for Windows XP 1.

Download drivers from website or insert the CD into your CD ROM Drive. Execute Steup.exe 3.

Select Next and click Yes of License Agreement Page. • AerPOS Series AP-3435 4. Select Next to continue driver installation. Global Issues Affecting Strategic Management. Finally, Finish and Restart the system.

• AerPOS Series AP-3435 LAN Driver Installation Realtek RT8111E LAN Driver Installation for Windows XP 1. Download drivers from website or insert the CD into your CD ROM Drive. Execute Setup.exe. Click Next to continue 4. Please wait while processing. • AerPOS Series AP-3435 5. Click Finish to complete the installation procedure.

• AerPOS Series AP-3435 Audio Driver Installation Realtek ALC269 Audio Driver Installation for Windows XP 1. Download drivers from website or insert the CD into your CD ROM Drive. Double click WDM_R253.exe. Click Next to continue. Click Finish and restart the system. • AerPOS Series AP-3435 FEC-AUO Capacitive Touch Tools / Driver Installation FEC-ELO Capacitive Touch Driver Installation for Windows XP / POS Ready 2009 Download drivers from FEC website or insert the Driver CD into your CD ROM Drive.

Execute Setup.exe 3. Click Next to continue. • AerPOS Series AP-3435 5. Finish the Installation folder and Click Next to continue. Installation finished, and click “finished” and Installation success **NOTE** The FEC AUO CAPACITVE TOUCH Driver is mandatory for Windows XP / POS Ready 2009. However, the Win7 / POS Ready 7 OS environment can automatically recognized FEC-AUO capacitive devices without any driver installation. • AerPOS Series AP-3435 FEC-AUO Capacitive Touch Calibration This Capacitive Touch has auto calibration controller via USB interface.

There are two different methods which can initiate the touch auto calibration: (1) Reboot the Terminal. (2) Switch Off the Display Module then Switch On Again **Note** Capacitive touch screen will not operate with either a gloved hand or with a mechanical stylus. • AerPOS Series AP-3435 EETI TouchKit Tools Installation EETI TouchKit Installation for Windows XP 1. Down load Touch Kit for WinXP (Windows XP_4.3.8.4207 setup.exe) 2. Execute Setup.exe 3. Click Next 4.

Choose “None” and Click Next for further installation process. • AerPOS Series AP-3435 5. Click OK to close the pop-up dialog. Click “Support Multi-Monitor System” and then Next to continue. Click Next and choose a program folder to “Touch Kit”, then “Next” 8.

Touch Controller found in USB, then Click Yes. • AerPOS Series AP-3435 9. Click OK and turn off the computer to restart your system again.

After the system finish rebooting follow the instruction to calibrate the Touch screen. • AerPOS Series AP-3435 EETI TouchKit Installation for Windows 7 1. Down load Touch Kit for Win 7 (Windows XP_4.3.8.4207 setup.exe), for Windows 7 (windows 7_5.6.0.6806 setup.exe) 2. Execute Setup.exe 3. Click Next 4.

Un-tick “Install RS232 interface driver” and Click “Next” to go for further process. • AerPOS Series AP-3435 5. Click “Yes” and confirm the USB touch controller is plugged. Click “Support Multi-Monitor System” and then Next to continue.

• AerPOS Series AP-3435 7. Click Next 8. Click OK and turn off the computer to restart your system again. After the system finish rebooting follow the directions to calibrate the Touch screen. • AerPOS Series AP-3435 TouchKit Control Panel This section explains the different options in the TouchKit control Panel. General tab The general tab allows you to: • Manage the touch screen controller you installed.

Tools tab The tools tab allows you to: •. • AerPOS Series AP-3435 Wireless LAN Driver Installation Wireless LAN Driver Installation for all Windows Operating Systems (Optional) 1. Download drivers from website or insert the CD into your CD ROM Drive.

(Locate the folder of D: Windows XP 1.Chipset Setup) 2. • AerPOS Series AP-3435 AP-3435 Specifications Aer POS AP-3435 Fan Less Chipset Intel Atom Processor D525 1.8G DDR3 Standard 1GB, Memory Max 4GB Main Power Supply 12V 90W Specifications Thermal Fan less Storage Device 1 x 2.5” SATA Driver Bay Speakers. • AerPOS Series AP-3435 Please note that the following troubleshooting guide is designed for people with strong computer hardware knowledge or Engineers and Maintenance. Touch Panel Does Not Work Check “Touch Display Module” is connected well with terminal. Check HID USB touch device is detected by OS. • AerPOS Series AP-3435 PS/2 Keyboard Is Not Functioning Normally Make sure the keyboard is properly connected to the PS/2 keyboard port before the system is powered up.

Check that the LED on the keyboard goes on then off after power on. If yes, the keyboard is getting power correctly.